Test Reports

WinDuct® are tested and complied with the following standards:

1. Laboratory : C.S.I.R.O Australia

Test Report

FSH 0993

:

Fire Resistance Test on Two Horizontal Ducts (Duct A & Duct B) to B.S 476 Part 24

Assessment No.

FCO-2282

:

Assessment on 2 and 3 sided duct installation

-

Oversize duct

-

60 and 120 minutes Insulation

FCO-2387

-

Assessment on Stress Level Limits for the Support

FCO-2385

-

Assessment on use of DW144 Duct Construction Standards

FCO-2439

-

Assessment on WinCoat™ use on St. Steel duct to B.S.476 part 24

FCO-2220

-

Assessment on duct tested on A.S. 1530.4 to the performance of the test if test conducted with B.S. 476 Part 24

FCO-2825

-

Assessment on use as Vertical Ductwork

2. Laboratory : BRANZ, New Zealand

Test Report

FR 2572

:

Fire Resistant Test to A.S. 1530.4 Duct A and Duct B

Assessment No.

99/1425

-

Assessment on 2 and 3 sided duct

-

Assessment on Increase of Duct Size

Test Report

FP2298

:

Fire Resistance Test to A.S. 1530.4 on Duct A and Duct B for Flat Over Duct

Assessment No.

96/952

-

Report on Wall Penetration of Ducts

FAR 2168

-

Assessment Report to increase the duct size to 10,000mm wide

FAR 2132

-

Assessment on The Fire Resistance of An Air Transfer Duct

FAR 2694

-

Assessment Report to B.S.476 Part 24 on Flat Over Duct

Test Report

FR5887

:

Fire Resistance of an external exposure Duct A and Internal exposure Duct B

3. Labotratory : Warrington Fire Research

Test Report No.

WFRA 21214

:

Assessment of Duct on tests A.S. 1530.4 and B.S 476 : Part 24 on Duct A (External Fire) and Duct B (Internal Fire)

WFRS No.

SC2436

:

The Fire Resistance Performance of Duct Assemblies

4. Laboratory : International Fire Consultants Ltd, England

PAR/10244/01

:

Assessment Report of WinDuct® to B.S. 476 Part 24 :1987 with insulation

FSB551

:

Product Certification Scheme on Intumescent Coating and WinCoat

5. Laboratory : SIRIM, Berhad Malaysia

Test Report No.

2002KL1105

:

Application properties to MS 134, viscosity ASTM D2196 non ventilate matter to MS 133 Pt B2 and specify gravity MS 133 Pt A12

CB990292

:

Report on test for Duct Insulation with Rockwool

KL980127

:

Cross Cut Adhension Test to ASTM 3359

SM971153

:

Wall Penetration System for Ductwork to B.S. 476 Part 24

KL970607

:

Resistance to Fungal Growth to MS 137 and MS 134

SM961658

:

Resistance to Impact Test to B.S.5669

SM961447

:

Non-combustible test to (Class'O') under B.S. 476 Part 6 & 7

SM961561

:

Non-combustible test to (Class'O') under B.S. 476 Part 6 & 7

2012KL0627

:

Standard Practice for Determining Volatile Organic Compound (VOC) Content

2015CB1962

:

Standard Test Method for Pull-off strength

2015FE0447

:

Fire Test to BS476 Part 24 up to 400°C

2015FE0301

:

Fire Test for fire rated smoke extraction ductwork system (HVAC)

6. Laboratory : FURGO Technival Services `Ltd. Hong Kong

Test Report No. 033238ST32534

:

Impact Test on BS 5669 Part 1:1989

7. Laboratory : Universidade De Macau

Test Report No. 2006-FRT79

:

Test on WinDuct® for 2 Hours Fire Rated Duct

8. Laboratory : TUV SUB PSB Pte Ltd, Singapore

Test Report No.7191050375 - MEC 12/1-MHA

:

Tendency of surface of material to support spread of flame under BS476 Pt 7:1997

Test Report No. 7191050375 - MEC 12/2-YWA

:

Method of test for fire propagation for product BS 476 Pt 6:1989